The specific method to extend the five bearings cycle:
1, the installation of the bearing
Bearing is installed properly, affecting accuracy, longevity, performance. Therefore, the design and assembly department to adequately studied bearing installation. I hope to be in accordance with the operating standards for installation. Operating standards of the project generally as follows:
(1) Clean bearings and related components;
(2) Check the size and finishing the connected components;
(3) Installation;
(4) After installing the bearing inspection;
(5) supplying a lubricant.
2, alignment, alignment
After installing the bearing, if not carefully for alignment, alignment may lead to additional load bearing suffering, friction and vibration. These may accelerate fatigue and reduce bearing life, and may damage the period of use of other machine parts. Furthermore, increased vibration and friction can significantly increase energy consumption and the risk of premature failure.
3, the basic condition monitoring
During use, the basic external conditions should regularly monitor the bearing operation, such as temperature, vibration and noise measurements, and so on. These regular inspections will identify potential problems early and prevent unexpected machine suspension phenomenon, so that production planning can be achieved to improve plant productivity and efficiency.
4, re-lubrication
In the course of the operation, the bearings requires the correct re-lubrication, perfect its performance. Bearing lubrication methods, divided into grease and oil lubrication. In order to play well bearing function, first of all, to choose suitable conditions, the use of lubrication purposes. If only consider the lubrication oil lubrication dominant. But there can be simplified specialty grease around the bearing structure.
5. Remove
When the bearing will reach its end-use period of time, it should be replaced. Although bearings can no longer be used, but the right to remove the original bearings, timely replacement of the new bearings, new bearings for extended life can play a good role in promoting. Appropriate use of techniques and tools to remove the bearings, will contribute to other machines bearing maintenance and repair.